[fprint] My AES2501 is working
Ahmed Kamal
email.ahmedkamal at googlemail.com
Sat Jan 24 20:33:48 GMT 2009
Can somebody please add the device to the list of supported ones
On Mon, Jan 19, 2009 at 11:30 PM, Ahmed Kamal
<email.ahmedkamal at googlemail.com> wrote:
> It's not listed on supported devices, however, it is working! I
> enrolled, and verified my fingerprint Yaay :) The laptop model was 'HP
> Pavilion dv6700 Notebook PC'
>
> Here's lshal dump for sensor:
>
> udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'
> access_control.file = '/dev/bus/usb/006/002' (string)
> access_control.type = 'scanner' (string)
> info.bus = 'usb_device' (string)
> info.callouts.add = {'hal-usb-scanner-add', 'hal-usb-scanner-add',
> 'hal-acl-tool --add-device'} (string list)
> info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
> info.capabilities = {'access_control', 'access_control'} (string list)
> info.linux.driver = 'usb' (string)
> info.parent =
> '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
> (string)
> info.product = 'AES2501 Fingerprint Sensor' (string)
> info.subsystem = 'usb_device' (string)
> info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'
> (string)
> info.vendor = 'AuthenTec, Inc.' (string)
> linux.device_file = '/dev/bus/usb/006/002' (string)
> linux.hotplug_type = 2 (0x2) (int)
> linux.subsystem = 'usb' (string)
> linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1' (string)
> usb_device.bus_number = 6 (0x6) (int)
> usb_device.can_wake_up = true (bool)
> usb_device.configuration_value = 1 (0x1) (int)
> usb_device.device_class = 255 (0xff) (int)
> usb_device.device_protocol = 255 (0xff) (int)
> usb_device.device_revision_bcd = 1571 (0x623) (int)
> usb_device.device_subclass = 255 (0xff) (int)
> usb_device.is_self_powered = false (bool)
> usb_device.linux.device_number = 2 (0x2) (int)
> usb_device.linux.sysfs_path =
> '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1' (string)
> usb_device.max_power = 100 (0x64) (int)
> usb_device.num_configurations = 1 (0x1) (int)
> usb_device.num_interfaces = 1 (0x1) (int)
> usb_device.num_ports = 0 (0x0) (int)
> usb_device.product = 'AES2501 Fingerprint Sensor' (string)
> usb_device.product_id = 9600 (0x2580) (int)
> usb_device.speed = 12.0 (12) (double)
> usb_device.vendor = 'AuthenTec, Inc.' (string)
> usb_device.vendor_id = 2303 (0x8ff) (int)
> usb_device.version = 1.1 (1.1) (double)
>
More information about the fprint
mailing list