[fprint] My AES2501 is working

[Ahmed Kamal]

It's not listed on supported devices, however, it is working! I
enrolled, and verified my fingerprint Yaay :) The laptop model was 'HP
Pavilion dv6700 Notebook PC'

Here's lshal dump for sensor:

udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'
 access_control.file = '/dev/bus/usb/006/002'  (string)
 access_control.type = 'scanner'  (string)
 info.bus = 'usb_device'  (string)
 info.callouts.add = {'hal-usb-scanner-add', 'hal-usb-scanner-add',
'hal-acl-tool --add-device'} (string list)
 info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
 info.capabilities = {'access_control', 'access_control'} (string list)
 info.linux.driver = 'usb'  (string)
 info.parent =
'/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1d_1'
(string)
 info.product = 'AES2501 Fingerprint Sensor'  (string)
 info.subsystem = 'usb_device'  (string)
 info.udi = '/org/freedesktop/Hal/devices/usb_device_8ff_2580_noserial'
 (string)
 info.vendor = 'AuthenTec, Inc.'  (string)
 linux.device_file = '/dev/bus/usb/006/002'  (string)
 linux.hotplug_type = 2  (0x2)  (int)
 linux.subsystem = 'usb'  (string)
 linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1'  (string)
 usb_device.bus_number = 6  (0x6)  (int)
 usb_device.can_wake_up = true  (bool)
 usb_device.configuration_value = 1  (0x1)  (int)
 usb_device.device_class = 255  (0xff)  (int)
 usb_device.device_protocol = 255  (0xff)  (int)
 usb_device.device_revision_bcd = 1571  (0x623)  (int)
 usb_device.device_subclass = 255  (0xff)  (int)
 usb_device.is_self_powered = false  (bool)
 usb_device.linux.device_number = 2  (0x2)  (int)
 usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1'  (string)
 usb_device.max_power = 100  (0x64)  (int)
 usb_device.num_configurations = 1  (0x1)  (int)
 usb_device.num_interfaces = 1  (0x1)  (int)
 usb_device.num_ports = 0  (0x0)  (int)
 usb_device.product = 'AES2501 Fingerprint Sensor'  (string)
 usb_device.product_id = 9600  (0x2580)  (int)
 usb_device.speed = 12.0 (12) (double)
 usb_device.vendor = 'AuthenTec, Inc.'  (string)
 usb_device.vendor_id = 2303  (0x8ff)  (int)
 usb_device.version = 1.1 (1.1) (double)