[fprint] Supported device to add

[Niels de Vos]

Hello,

the Cherry SmartTerminal with model-number SFR-1244U on the back
(doesn't seem to be available on the web) is already supported by
libfprint. The device itself functions as a USB-hub, containing a
card-reader and a fingerpint-sensor with a chip from UPEK.

Looking on the German Cherry website
<http://www.cherry.de/english/products/it_security.htm>, most devices
with a fingerprint-sensor should be supported (AES4000, UPEK).

Cheers,
Niels

== /proc/bus/usb/devices ==
T:  Bus=05 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  5 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05e3 ProdID=0606 Rev= 7.02
S:  Product=USB2.0 Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=05 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046a ProdID=002d Rev= 2.03
S:  Manufacturer=Cherry GmbH
S:  Product=SmartTerminal XX44
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=0b(scard) Sub=00 Prot=00 Driver=usbfs
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=24ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=05 Lev=02 Prnt=05 Port=01 Cnt=02 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0483 ProdID=2015 Rev= 0.01
S:  Manufacturer=TouchChip®
S:  Product=Fingerprint Reader
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=20ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms