[fprint] Authentec FP Reader seems not to be detected

[Kunal Gangakhedkar]

Guessing from your USB dev ID, it seems to be AuthenTec AES2810 device.
It's not yet supported as per:
http://www.reactivated.net/fprint/wiki/Unsupported_devices#AuthenTec_AES2550_.26_AES2810

However, Daniel seems to be working on it.

-- 
Kunal


On Saturday 04 Jul 2009 9:43:00 pm Mario Gleirscher wrote:
> Hello there,
>
> I am using Ubuntu/Jaunty on my HP EliteBook 8530p with an Authentec
> device (see below) and installed fprint (usual packages + libusb-1.0 +
> corresponding /etc/pam.d/common-auth configuration).
>
> Both, fprint_demo and pam_fprint_enroll are reporting "No devices
> detected." when I want to enroll my fingerprint for later authentication
> with pam.
>
> Is it possible that my reader is not supported by fprint yet?
> I don't know, why this reader has not a specific product id.
>
> Many thanks for any help in advance,
> Mario
>
>
> PS: Device Info:
>
> lsusb -s 4:2 -v
>
> Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc.
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass          255 Vendor Specific Class
>   bDeviceSubClass       255 Vendor Specific Subclass
>   bDeviceProtocol       255 Vendor Specific Protocol
>   bMaxPacketSize0         8
>   idVendor           0x08ff AuthenTec, Inc.
>   idProduct          0x2810
>   bcdDevice           17.03
>   iManufacturer           0
>   iProduct                1 Fingerprint Sensor
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           32
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xa0
>       (Bus Powered)
>       Remote Wakeup
>     MaxPower              100mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol    255 Vendor Specific Protocol
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0040  1x 64 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0008  1x 8 bytes
>         bInterval               0
> Device Status:     0x0000
>   (Bus Powered)
>
>
> _______________________________________________
> fprint mailing list
> fprint at reactivated.net
> http://lists.reactivated.net/mailman/listinfo/fprint