[fprint] U.are.U 4000 Reader

[Sébastien Morin]

On Dec 1, 2007 10:04 AM, Daniel Drake <dan at reactivated.net> wrote:

> Sébastien Morin wrote:
> >
> >
> > On Dec 1, 2007 9:19 AM, Daniel Drake <dan at reactivated.net
> > <mailto:dan at reactivated.net>> wrote:
> >
> >
> >     What about img_capture_continuous? That one has no finger-on-sensor
> >     detection.
> >
> >
> > Here is the output from the log, and the image stays blank:
>
> What do you mean by 'blank'?
>

The image is just white, there is absolutely nothing else, if I press "S" to
go to standardisez mode it is all black.

I can send a screenshot if you want ?


> > fp:debug [fp_init]
> > fp:debug [register_driver] registered driver upekts
> > fp:debug [register_driver] registered driver uru4000
> > fp:debug [register_driver] registered driver aes1610
> > fp:debug [register_driver] registered driver aes2501
> > fp:debug [register_driver] registered driver aes4000
> > fp:debug [register_driver] registered driver upektc
> > fp:debug [find_supporting_driver] driver uru4000 supports USB device
> > 05ba:0007
> > Found device claimed by Digital Persona U.are.U 4000/4000B driver
> > uru4000:debug [get_hwstat] val=85
> > uru4000:debug [do_init] rebooting device power
> > uru4000:debug [set_hwstat] val=05
> > uru4000:debug [get_hwstat] val=00
> > uru4000:debug [get_hwstat] val=05
> > uru4000:debug [set_hwstat] val=85
> > uru4000:debug [fix_firmware] encryption byte at 793 reads 07
> > uru4000:debug [set_hwstat] val=05
> > uru4000:debug [get_hwstat] val=00
> > uru4000:debug [get_irq_with_type] type=56aa
> > uru4000:debug [get_irq] irq type 56aa
> > fp:debug [fp_dev_open]
> > using Xv format 0x32595559 YUY2 packed
> > using Xv format 0x32595559 YUY2 packed
> > Press S to toggle standardized mode, Q to quit
> > fp:debug [fpi_imgdev_capture] uru4000 will handle capture request
> > uru4000:debug [set_mode] 20
> > fp:debug [fpi_img_new] length=111424
>
> Do the last 3 lines only appear once, or do they repeat?
>
>
Yes they do, until I exit the application at wich point I get:

fp:debug [fp_dev_close]
uru4000:debug [set_mode] 00
uru4000:debug [set_hwstat] val=80
fp:debug [fp_exit]



-- 
Sébastien Morin
smsisko at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.reactivated.net/pipermail/fprint/attachments/20071201/0eba60f0/attachment-0001.html